Rowe Scan 850i - Basic Scanning Procedure and Height Adjustment

6.1 Performing a Scan
Switch the scanner ON, boot the PC, and
afterwards start the ROWE SCAN APP.
For this purpose, double-click on the icon on
the desktop or use the link in the Start menu.
Figure 6.1: Desktop link
ScanManager
 Place the document onto the feed
table (1) with the printed side facing
up.
 Align the document in a way that the
zero point (3) is in the middle of the
document.
 Feed the document into the scanner
until the scanner takes it in.
 Select the requested color mode in
ROWE SCAN APP (see Chapter
7.10.3.1 on Page 52).
 Select the requested scan format in
ROWE SCAN APP (see Chapter
7.10.3.3 on Page 57) if applicable.
For the document width being
recognized automatically, select the
default setting "Auto“.
 Select the storage location in ROWE
SCAN APP (see Chapter 7.10.1.1 on
Page 46) if required.
Figure 6.2: How to position the
document
Press the "Start" button (2) on the control
panel of the scanner or in ROWE SCAN APP.
The "Start“ button on the control
panel (2) and in ROWE SCAN APP
have the same function.
Figure 6.3: Start button control panel