DBP Digital Beltpack Table of contents | en 3
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
Table of contents
1
Safety 6
1.1 Copyright and Disclaimer 6
1.2 Notices 6
1.3 Important safety instructions 7
2
Introduction 8
2.1 Features 8
3
Reference view 9
3.1 Belt clip removal and replacement 10
4
Cabling 11
4.1 To OMS 11
4.2 To OMI 12
4.3 To ODIN 12
4.4 PoE 13
5
Install the Bluetooth dongle 15
6
Create an Intercom connection 16
6.1 Connect to OMS using Connect Devices 16
6.2 Configure intercom OMNEO ports to make connection offers 16
6.2.1 Configure OMS to make a connection offer 16
6.2.2 Configure ODIN to make a connection offer 17
6.3 Accept a connection offer on DBP 18
6.4 Create connections using IPedit 18
6.4.1 Add DBP to IPedit 18
6.4.2 Configure an OMNEO channel for DBP using IPedit 19
6.4.3 Configure the DBP to accept an OMNEO offer using IPedit 21
6.5 Create connections using AZedit 22
6.5.1 Configure OMS/ODIN to make a connection offer 22
6.5.2 Configure an OMI card to make a connection offer 23
7
Modes of operation 25
7.1 PL Mode 25
7.2 Keypanel Mode 25
8
Basic Operation 26
8.1 Main screen icons 26
8.2 Navigation basics 27
8.3 Hot keys 28
8.4 UI controls 31
8.5 Volume adjustment 32
8.6 Call Signaling (PL Mode only) 34
8.7 Talk and Listen 34
8.8 Call waiting window 35
8.9 Bluetooth 37
8.9.1 Answer a phone call via Bluetooth 37
8.9.2 Phone call management window 39
8.9.3 Patch a phone call to the Intercom 39
8.10 Upgrade firmware 40
8.11 Download screen saver images or splash screen images 44
9
Menu Structure 46
9.1 Setup | Network 46
9.1.1 Device Name 47
To Next Page
Loading...
