DBP Digital Beltpack Create an Intercom connection | en 21
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
6.4.3 Configure the DBP to accept an OMNEO offer using IPedit
As an alternative to accepting offers through the DBP user interface, use IPedit to configure
the DBP to accept connection offers from ODIN. For information on using the DBP user
interface to accept connection offers, refer to
Accept a connection offer on DBP, page 18
.
To configure the DBP to accept an OMNEO offer using IPedit, do the following:
Notice!
The Destination Type does not need to be selected if using the Browse window to select the
device. It fills the type and IP Address automatically.
Using the Channel Configuration Pane
1. In the Destination Device Name field, click the … button.
The Discovered Devices screen displays.
To Next Page
Loading...
