DBP Digital Beltpack Menu Structure | en 57
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
3. Rotate either shaft encoder to toggle between choices.
4. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
9.4.2 Test Mode
Use the Test Mode menu item to check the operation of all keys and displays on the belt pack.
To enter test mode, do the following:
1. Navigate to the Test Mode menu item (Setup | Service | Test Mode).
2. Press the SEL/MENU button.
The field becomes active.
3. Press the SEL/MENU button.
The Test Mode screen displays.
To Next Page
Loading...
