DBP Digital Beltpack Menu Structure | en 75
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
2. Press the SEL/MENU button.
The field becomes active.
3. Rotate the A/C shaft encoder to scroll through the selections.
4. Rotate the B/D shaft encoder to select or deselect the item.
5. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
9.12.2 Headset Left
Use the Headset Left menu item to select which input sources are routed to the left channel
of the headset independently to those routed to the right channel.
By default, From Intercom is selected. If Bluetooth is installed, then From Intercom and BT are
selected.
Available options for this field are From Intercom, 3.5mm Aux In, OMNEO Ch2 In, and
Bluetooth In (if installed).
To select which input sources are routed to the left channel of the headset, do the
following:
1. Navigate to the Headset Left menu item (Audio | Mixers | Headset Left).
2. Press the SEL/MENU button.
The field becomes active.
3. Rotate the A/C shaft encoder to scroll through the selections.
4. Rotate the B/D shaft encoder to select or deselect the item.
To Next Page
Loading...
