DBP Digital Beltpack Menu Structure | en 61
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
9.5 Setup | Authentication
Use the Authentication menu to enable or disable PIN entry and set the PIN entry security.
When authentication is active, entry of a PIN code is necessary to access the menu structure.
Notice!
Confirmation of the PIN, if Authentication is enabled, occurs upon exiting the menu or the PIN
is changed.
9.5.1 Require PIN
By default, the DBP does not have PIN entry security enabled.
To enable PIN entry, do the following:
1. Navigate to the Authentication menu item (Setup | Authentication).
2. Press the SEL/MENU button.
3. Navigate to the Require PIN menu item.
4. Press the SEL/MENU button.
The field becomes active.
5. Rotate either shaft encoder to move the focus to Enabled.
6. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
To Next Page
Loading...
