RTS DBP 5F - 3.5 Mm Aux out; OMNEO Ch2 out

DBP Digital Beltpack Menu Structure | en 77
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
3. Rotate the A/C shaft encoder to scroll through the selections.
4. Rotate the B/D shaft encoder to select or deselect the item.
5. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
9.12.5 3.5mm Aux Out
Use the 3.5mm Aux Out menu item to select input sources routed to 3.5mm Aux Out.
Available options for this field are From Intercom, Active Mic, OMNEO Ch2 In, and Bluetooth In
(if available).
To select input sources routed to the 3.5mm Aux Out, do the following:
1. Navigate to the 3.5mm Aux Out menu item (Audio | Mixer | 3.5mm Aux Out).
2. Press the SEL/MENU button.
The field becomes active.
3. Rotate the A/C shaft encoder to scroll through the selections.
4. Rotate the B/D shaft encoder to select or deselect the item.
5. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
9.12.6 OMNEO Ch2 Out
Use the OMNEO Ch2 Out menu item to select input resources routed to OMNEO Ch2 Out.
Available options for this field are From Intercom, 3.5mm Aux In, Active Mic, and Bluetooth In
(if installed).