Using special copy features
137
6. Copying
Output
You can select the options for how you want the outputs to be
arranged.
•
Sort:
Select how to sort the output.
-
Collated:
The outputs are in sets to match the
sequence of originals.
-
Uncollated:
The outputs are sorted into stacks of
individual pages.
•
Rotate:
Stacks the printouts in criss-crossed sets.
• This feature is available only when the
finisher is not installed.
• This feature is available only with Letter- and
A4-sized print media.
• Before using this feature, you have to load
the paper in the trays with SEF (Short edge
feed) and LEF (Long edge feed). For example,
direction of paper feeding in tray 1 is SEF,
and direction of paper feeding in tray 2 is
LEF.
Item Description
Output
• This feature is available only when the
optional finisher is installed.
• Some features are available only when the
optional finisher is installed.
• Output Tray: This option allows you to specify the
tray where to output the printed documents.
• Staple: Specify the number of staples to use when
binding the document (either 1 or 2 staples).
• Punch: Specify the number of holes to punch in the
document (either two or three holes). Some punch
kits may offer a 4 Hole option instead of the 3 Hole
option.
Darkness
You can adjust the degree of darkness. This feature
allows dark images to be printed into lighter images, or
light images into darker images.
Item Description
To Next Page
Loading...
