158
7. Scanning
Scanning and sending to your computer
This option allows you to scan an image on the machine and send it out to your
network-connected computer.
10
For a network connected machine
Make sure the scanner driver is installed on your computer.
1
Make sure that your machine and the computer are connected to a
network.
To enable this feature, click or tap Advanced Setting > Scan to PC Settings
in Samsung Easy Printer Manager, and then set the Scan activation option
to Enable (see "Using Samsung Easy Printer Manager" on page 276). This
option is disabled.
2
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
3
Press Scan to PC from the display screen.
4
Select your computer name and press OK. If the machine requests a
password, enter the password using the numeric keypad on the control
panel.
5
Press the application program you want and press Select.
Default setting is My Documents.
6
Set the scan quality with Resolution in the Basic tab.
7
Set the size of original in the Advanced tab. If you are not sure of the
original size, select Auto.
8
Set the color mode in the Image tab.
9
Set the file format in which the image is to be saved in the Output tab.
To Next Page
Loading...
Need help?
General