187
8. Faxing (Optional)
Adjusting the document settings
Before sending a fax, you can adjust the document settings, such as resolution,
darkness, duplex and so on.
• Some menus may not appear in the display depending on options or
models.
• The document setting herein is for the current job only. If you want to
change the default settings on document settings, refer to Machine
Setup > Application Settings > Fax Settings.
To change the menu options:
1
Press Fax from the display screen.
2
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
3
If you want to customize the copy settings including reduce/enlarge,
darkness, original type, and more from the display screen.
4
Press the Basic, Advanced, or Image tab from the display screen.
5
Press the appropriate option.
Item Description
Darkness
Adjusts the brightness level to scan an original that is
easier to read, when the original contains faint
markings and dark images.
To Next Page
Loading...
