42
3. Using a Network-Connected Machine
Network environment
You can use network after connecting network cable to a corresponding port on
your machine.
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
Items Specifications
Network interface • Ethernet 10/100/1000 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN
a
Network operating
system
•Windows
®
XP Service Pack 3, Windows Server
®
2003,
Windows Vista
®
, Windows
®
7/8, Windows Server
®
2008 R2, Windows
®
10, Windows
®
Sever 2016
•Various Linux OS
• Mac OS X 10.6 -10.10
•UNIX OS
Network protocols •TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP,
IPSec)
Wireless security
a
• Authentication: Open System, Shared Key, WPA/
WPA2-Personal/Enterprise
• Encryption: WEP64, WEP128, TKIP, AES
a. Optional device
Items Specifications
To Next Page
Loading...
