130
6. Copying
ID card copying
5
ID Copy
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original.
This feature is helpful for copying a small-sized item, such as a business card.
• This copy feature is available only when you place originals on the
scanner glass.
• The size of the 2-sided originals should be smaller than A5, if not, some
of it won’t be copied.
1
Press Copy from the display screen.
2
Press the Advanced tab > ID Copy from the display screen.
3
Select a tray in Paper Source.
4
Follow the steps on the display screen.
5
Place the front side of an original facing down on the scanner glass as
shown below, and close the RADF.
When you place an original on the scanner glass, leave a little space
between the edge of the scanner glass and the original. Otherwise, part of
original may not be printed.
6
Press (Start) on the control panel. Then the machine starts scanning.
To Next Page
Loading...
Need help?
General