136
6. Copying
Using special copy features
On the Basic, Advanced, or Image tab of the Copy screen, you can select
specific copy features.
Some menus may not appear in the display depending on options or
models.
To change the menu options:
1
Press Copy from the display screen.
2
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
3
If you want to customize the copy settings including reduce/enlarge,
darkness, original type, and more from the display screen.
4
Press the Basic, Advanced, or Image tab from the display screen.
5
Press the appropriate option.
Item Description
Paper Source
Paper Source sets the tray containing the paper to be
used for printing. The machine prints the scanned
image on the paper in the selected tray. You can see the
icons that show paper sizes and the remaining amount
of paper in each tray.
Reduce/Enlarge
Reduces or enlarges the size of a copied image.
If the machine is set to Eco mode, reduce and
enlarge features are not available.
To Next Page
Loading...
Need help?
General