Machine setup
240
12. Menu Overview and Advanced Features
3
General Settings
Some menus may differ from your machine depending on its options or
models.
Before using the machine, set up the general settings, as follows:
Press Machine Setup > General Settings from the display screen.
Feature Description
Date and
Time
a
Allows you to set the date and time. The date and time you set
in this option will be used for sending/printing delayed fax/
print jobs or will be printed on reports.
Power Saver Allows you to reduce energy consumption. If you set this
option, the machine goes into power saving mode when not in
use.
• Power Save: When you are not using the machine for a
while, use this option to save power. The machine conserves
more power in Power Save option than in Low Power Save
mode.
• Low Power Save: Low Power Save option allows your
machine to save power. When you are not using the machine
for a while, some parts of the machine automatically enter
Low Power Save option. Low Power Save option conserves
less power than Power Save option.
• Performance Optimization: When this option is On, you
can wake up the machine from the power saving mode with
the following actions:
- Pressing (Power/Wakeup)on the control panel.
- Loading paper in a tray.
- Opening or closing the door.
- Pulling a tray out or pushing a tray in.
- Place the originals in the RADF.
- Plug in the USB Drive device.
• Auto Power Off: You can set the printer to turn power off
automatically when the machine has been in power save
mode for the length of settings on the operator panel.
• Available setting range is from 5 min. to 240 min.
• To turn the machine on again, pressing (Power/
Wakeup on the control panel.
Feature Description
To Next Page
Loading...
Need help?
General