Display screen and useful button
31
1. Introduction
• Scan to Server: Enters the Scan to Server menu (see "Scanning and
sending via SMB/FTP" on page 152).
• Scan to PC: Enters the Scan to PC menu (see "Scanning and sending
through email" on page 146).
• Scan to Shared Folder: Enters the Scan to Shared Folder menu (see
"Scanning and sending to USB /shared folder" on page 160).
• Quick Copy: Enters the Quick Copy menu (see "Quick copying" on page
129).
• USB: Enters the USB menu. When a USB memory device is inserted into the
USB memory port on your machine, USB is activated on the display screen
(see "Understanding the USB screen" on page 227).
• Scan to USB: Enters the Scan to USB menu. When a USB memory device is
inserted into the USB memory port on your machine, Scan to USB is
activated on the display screen (see "Scanning to a USB memory device" on
page 231).
• Machine Setup: You can browse current machine settings or change
machine values (see "Machine setup" on page 238).
Some menus are only configured by an administrator or an authorized user
who has an ID and password registered on the machine by an administrator.
When the machine requests, enter the ID and password.
17
Counter button
When you press the Counter button on the control panel, You can see the
number of impressions.
When you select Device, you can see the number of impressions by device. An
impression typically refers to a single side of a sheet and not a one-sided print.
• Total Usage: Displays the total number of impressions.
• Send Usage: Displays the number of images sent via email, server, etc.
• Large Page: Displays the total number of impressions with large size paper.
• Fax Send Usage(PSTN): Displays the number of sent faxes.
When you select User, you can see the number of usage, limit, and remaining
usage by each user.
To Next Page
Loading...
Need help?
General