30 Cubis
®
MCA Operating Instructions
Operating Concept
Level 1 Level 2 Level 3 Description
Timer-controlled
actions
Start task Display, edit or delete properties for starting the
task.
Display message Display, edit or delete the message name and
content.
Standby mode Display, edit or delete execution of the action for
standby mode.
Wake-up from standby Display, edit or delete the execution time and
name for wake-up from standby.
Switch-off Display, edit, or delete the execution time for the
action.
Automatic backup Display, edit, or delete the backup name and
properties.
Export audit trail Display and select options for export.
Weighing and
Print Profiles
Weighing List of available weighing
profiles
Display all available weighing profiles. Edit, create
or delete the weighing profiles.
YDP30 List of available print profiles Display all available print profiles. Edit, create or
delete the print profiles.
PDF PDF document on USB Display all available print profiles. Edit, create or
delete the print profiles.
CSV Spreadsheet (CSV) on USB Display all available print profiles. Edit, create or
delete the print profiles.
PC direct PC direct (USB keyboard
emulation)
Display all available PC direct profiles. Edit, create
or delete the PC direct profiles.
SBI direct SBI print Display all available SBI direct profiles. Edit, create
or delete the SBI direct profiles.
Connections Connectors USB Define the settings for the connected USB stick.
YDP30-NET Enter the IP/host address and the parameters for
the printer.
FTP If this extension has been configured in the QAPP
center: The connection to the FTP or FTPS servers
facilitates file transfer using the FTP or FTPS
protocol.
FTPS
Network printer Enter the IP/host address and the protocol for the
network printer.
SMB If the “Windows File Server” extension has been
configured in the QAPP center: The connection to
the Windows file server facilitates file transfer
using the Server Message Block (SMB protocol).
Network General settings Define the device host name.
Ethernet Display and edit settings for the device’s Ethernet
connection.
Wi-Fi Define and edit settings for the device’s Wi-Fi
connection.
Website / web services Website access Determines the settings for the display of the
website for the device.
Remote access Define the settings for controlling the device
remotely.
Web service password Define the password for the web services.