t Define when the number of measurements (items) will be set.
Enter fixed quantity: The quantity of items is defined beforehand.
Quantity can be changed during the process:
Enter the quantity of items when you execute the task.
t Define whether or not automatic taring should take place after storing the
value.
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, select Save.
Executing a Task: Totalizing
D t If you haven’t already done so, go to Task Management.
y The task selection is displayed.
t Select the desired task.
or
t If the desired task is already marked, select Start.
t If required, enter the number of items that you want to add up.
t Place the first sample on the weighing pan.
t To start totalizing, select Start.
t During the task, you can view the results of previous measurements at any time
by selecting Calc.
100 Cubis MSU User Manual
Totalizing
To Next Page
Loading...
Need help?
General
