Sartorius Cubis Series User Manual

Interfaces
Cubis MSU User Manual 135
Establishing a Radio Connection with the Bluetooth Printer
t Make sure that the printer to which you wish to connect is ready to operate.
t Select the Sartorius BT printer as the device.
t To establish the connection, select Scan.
y The balance will now search for the Bluetooth device. This process may take
time. Wait for the next message to appear on the display.
y A message will appear to confirm whether the printer has been found.
t To save the settings, select Save.
y The connection will initially be terminated after saving.
The LED on the printer will continue to flash blue/red.
y As soon as the configuration menu is exited, the connection will
be re-established. The LED on the printer will then illuminate permanently
(blue).

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model