Balance with Draft Shield
t Remove the packages (containing draft shield panels, weighing pan, pan sup-
port, AC adaptor, etc.) from the lower packaging and place them to one side.
t Use both hands to lift the balance out of the packaging.
3
Exercise caution to avoid glass breakage.
Never lift the equipment by the draft shield panels to remove it from
the packaging.
t Place the balance on an even surface.
Balance without Draft Shield
t Use both hands to remove the model without a draft shield from
the packaging.
t Remove the AC adaptor and the balance parts from the packaging.
Cubis MSU User Manual 9
Getting Started
To Next Page
Loading...
