t Once you configure the components, define the unit:
*Amount in weight unit (Formulation 1)
Default in percent, sum = 100% (Formulations 2 and 3)
Default in percent, sum <> 100% (Formulations 4 and 5)
t Select Next.
t Enter the number of components.
y An overview of all settings is displayed (here, Formulation 2 as an example).
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, select Save.
Executing a Task: Formulation
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Select the desired task.
or
t If the desired task is already marked, select Start.
t If required, enter the number of components that you want to weigh while
adding them.
t To start the formulation, select Start.
t If required, enter the name of components.
Please note that you will be able to scroll through the lines with the cursor softkeys
as soon as a scroll bar appears to the right of the display.
92 Cubis MSU User Manual
Formulation
To Next Page
Loading...
Need help?
General
