Date Code 20080110 Distributed Network Protocol (DNP3) G-5
SEL-387E Instruction Manual
Sends/Executes Control Operations:
WRITE Binary Outputs Never ; Always Sometimes Configurable
SELECT/OPERATE Never ; Always Sometimes Configurable
DIRECT OPERATE Never ; Always Sometimes Configurable
DIRECT OPERATE - NO ACK Never ; Always Sometimes Configurable
Count > 1 ; Never Always Sometimes Configurable
Pulse On Never ; Always Sometimes Configurable
Pulse Off Never ; Always Sometimes Configurable
Latch On Never ; Always Sometimes Configurable
Latch Off Never ; Always Sometimes Configurable
Queue ; Never Always Sometimes Configurable
Clear Queue ; Never Always Sometimes Configurable
Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.
FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
Either time-tagged or non-time-tagged for a single event
Both time-tagged and non-time-tagged for a single event
Configurable (attach explanation)
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY
Reports Binary Input Change Events
when no specific variation requested:
Never
Only time-tagged
; Only non-time-tagged
Configurable to send both, one or the
other (attach explanation)
Reports time-tagged Binary Input Change
Events when no specific variation
requested:
; Never
Binary Input Change With Time
Binary Input Change With Relative
Time
Configurable (attach explanation)
Sends Unsolicited Responses:
Never
; Configurable (attach explanation)
Only certain objects
Sometimes (attach explanation)
; ENABLE/DISABLE UNSOLICITED
Function codes supported
Sends Static Data in Unsolicited
Responses:
; Never
When Device Restarts
When Status Flags Change
No other options are permitted.