Sedecal SHF-310 - Table of Contents

HF Series Generators
Installation
IN-1052R0
i
TABLE OF CONTENTS
Section Page
1 INTRODUCTION 1.........................................................
1.1 Tools and Test Equipment 1............................................
1.2 Pre-Installation Check 2...............................................
1.3 General Cautions 3...................................................
2 UNPACKING, POWER LINE CONNECTION AND CABINET INSTALLATION 5...
2.1 Control Console Installation (optional) 14.................................
3 CABLE CONNECTIONS 15..................................................
3.1 Cable Routing Inside Generator Cabinet 15...............................
3.1.1 General Cable Routing 15.......................................
3.2 High Voltage Cables Connection 17......................................
3.2.1 X-ray Tubes with Metallic Insert Envelope 17.......................
3.2.2 High Voltage Cables 18..........................................
3.3 X-ray Tube Connection 19..............................................
3.3.1 Stator Cable 19.................................................
3.3.2 Tube Selection Signals 22.......................................
3.4 Interconnection Cables 22..............................................
3.4.1 Serial Interconnection RS232 / RS422 24..........................
3.4.2 Collimator Error Signal (optional) 30...............................
3.4.3 Door Interlock Signal 30.........................................
3.4.4 Warning Light Signal 31.........................................
3.4.5 Collimator Lamp and System Locks 31............................
3.4.6 Buckys (optional) 32............................................
3.4.7 Tomo Device (optional) 32.......................................
3.4.8 Ion Chambers (optional) 33......................................