HF Series Generators
Maintenance
MA-1004R4
6
2.3 GENERAL CLEANING
NEVER ATTEMPT TO CLEAN OR HANDLE ANY PART OF THE
X-RAY GENERATOR WHEN IT IS TURNED ON. SWITCH OFF
THE GENERATOR MAIN DISCONNECT BEFORE CLEANING
OR INSPECTING.
2.3.1 EXTERNAL SURFACES
Clean external covers and surfaces frequently, particularly if corroding
chemicals are present and specially parts in contact with the patient, with a cloth
moistened in warm water with mild soap solution. Rinse wipe with a cloth
moistened in clean water. Do not use cleaners or solvents of any kind.
Clean Console keyboard and displays with a cloth dampened in warm water.
Rinse wipe with a cloth dampened in clean water.
Also check painted surfaces for scratching and touch up as required.
2.3.2 INTERNAL CABINET C LEANING
Remove the external access cover from the Generator Cabinet.
Visually inspect all major components for dust or foreign items. Search carefully
to detect objects which might cause short circuits and for loose connections.
If excess dust is present, clean the interior of the Generator Cabinet using a dry
brush or vacuum cleaner. Make sure that the fans operate properly and the vent
holes of the cabinet are not obstructed.
2.3.3 INTERNAL TOUCH SCREEN CONSOLE CLEANING
MAKE SURE THAT THE TOUCH SCREEN CONSOLE IS
POWERED OFF OR UNPLUGGED.
Remove the front cover of the Touch Screen Console.
Visually inspect internally for dust or foreign items. Search carefully to detect
objects which might cause short circuits and for loose c onnections.
If excess dust is present, c lean the interior of the Touch Screen Console using
a dry brush or vacuum cleaner. Make sure that the fans operate properly and
the vent holes are not obstructed.
Clean the Touch Screen sensor with an isopropyl alcohol and water solution
ratio of 50:50 , always damp the lint-free cloth and then clean the screen. Spray
the cleaning liquid onto the cloth, never spray directly on the screen.
To Next Page
Loading...