HF Series Generators
Installation
IN-1052R0
24
3.4.1 SERIAL INTERCONNECTION RS232 / RS422
GENERATOR TOUCH SCREEN (TPC) USING A POSITIONER WITHOUT
TOUCH SCREEN
For Generator using a TPC, perform the following connections:
(Refer to Illustration 3-3)
1. Connect the AC Supply Cable (A7059--xx) from “AC Supply” connector
of the TPC to the respective terminals in TS1 of the Generator Cabinet.
2. Connect the Serial Interconnection Cable ( A7067--xx) from “COM1
(Generator)” of the TPC to J5 of the Generator Cabinet.
3. Connect the Handswitch Cable to the Handswitch connector of the TPC.
4. The TPC includes extra connectors for the Mouse and the Keyboard.
Connect them as indicated in the illustration below. In some cases, these
communication ports are used to interface the TPC with other devices.
For futher information, refer to Section 5.2 -- Maps 54301052 and
A6188--03 at the end of this Document.
Note .
To Next Page
Loading...