Segway Personal Transporter i2 - A. Post-Service Tests; Start-up Test

Segway®PersonalTransporteri2,x2,x2TurfPartsReplacementGuide A‐1
A. Post-Service Tests
ThischapterdescribesstandardteststoperformafterservicingtheGen2SegwayPT.
ThefollowingwarningsapplytoinstructionsinthisSectionAregardingPost‐ServiceTests.
Start-up Test
To perform a start-up test, do the following:
• MakesureWirelessInfoKeycontrollerproperlypowersonmachinewithoutanerrormessage.
Failure to do so could result in serious
injury or death.
ESD PROCEDURES
Any time repair involves opening the console or chassis cover, best-
practice electrostatic discharge (ESD) control procedures must be
followed. Failure to follow ESD procedures could result in personal
injury or damage to property.
Read all
instructions.