Segway Personal Transporter i2 - Console Trim Removal or Installation

6‐6 Segway®PersonalTransporteri2,x2,x2TurfPartsReplacement
Console Trim Removal or Installation
To remove console trim:
1. MakesureSegwayPTispoweredoffand
unplugged.
2. Pu
lluponfrontportionoftrimandtiltit
aw ayfromchargeport.SeeFigure6‐4.
Figure6‐4:RemoveorInstallConsoleTrim
Make sure IEC connector (charge) port remains
clean and dry.
To install console trim:
1. MakesureSegwayPTispoweredoffand
unplugged.
2. Pres
srearportionofconsoletrimover
chargeport.
3. Tiltfrontportionofconsol
etrimtoengage
withconsole.SeeFigure6‐4.
4. Pe
rformpost‐servicetests(pageA‐1).
Console Trim
21281-00001 Black
21281-00002 White
21281-00005 Sage