Segway Personal Transporter i2 - 10. Chassis Cover

Segway®PersonalTransporteri2,x2,x2TurfPartsReplacementGuide 10‐1
10. Chassis Cover
Thischapterdescribesremovalandinstallationproceduresfor
thechassiscoveronaGen2SegwayPT.
Thefollowingwa
rningsapplytoinstructionsinthisSection10
regardingtheChassisCover:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
ESD PROCEDURES
Any time repair involves opening the console or chassis cover, best-
practice electrostatic discharge (ESD) control procedures must be
followed. Failure to follow ESD procedures could result in personal
injury or damage to property.
Read all
instructions.
Power off
the Segway PT.
Unplug the
Segway PT.
Applies to Models
i2,x2,x2Turf
Qualifications
CertifiedServiceTechnician
Technician Replaceable Parts
ChassisCover(20316‐00001)
Chassiscover,i2withwarninglabel(no
fastenersincluded)
ChassisCoverFastener(
20540‐00001)
(12)Chassisfasteners
Required Tools
• T‐276‐lobewrench