Segway Personal Transporter i2 - 2. Mats

Segway®PersonalTransporteri2,x2,x2TurfPartsReplacementGuide 2‐1
2. Mats
Thischapterdescribesremoval,inspection,andinstallationof
matsonaGen2SegwayPT.
Thefollowingwa
rningsapplytotheinstructionsinthis
Section2regardingMats:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
MATS
Always ensure that the top of the powerbase and bottom of mat
are clean, dry, and free of debris. These mats protect the rider
detect sensors located beneath them. Mats should be secured in
place prior to riding. Failure to follow these instructions could
interfere with the operation of the Segway PT leading to serious
injury or death or damage to property.
Read all
instructions.
Power off
the Segway PT.
Unplug the
Segway PT.
Applies to Models
i2,x2,x2Turf
Qualifications
CustomerReplaceable
Customer Replaceable Kit
i2/x2StandardMatKit(20949‐00001)
(1)Mat
(2)Mats
i2/x2AluminumMatKit(20658‐00001)
(2)Mats
i2/x2ComfortMatKit(20659‐00001)
(2)Mats