Segway®PersonalTransporteri2,x2,x2TurfPartsReplacementGuide 3‐1
3. Battery Packs
Thischapterdescribesremovalandinstallationproceduresfor
theLi‐ionbatteriesusedonaGen2SegwayPT.For
informationonusingthebatteries,includingchargingand
maintainingthem,safetyrules,specifications,andgeneral
care,refertoSegwayPTi2,x2ReferenceManual.
Thefollowingwa
rningsapplytotheinstructionsinthis
Section3regardingBatteryPacks:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
FASTENERS
• Use only Segway-approved fasteners.
• Do not tighten or reuse any fastener except the screws used to
attach the battery packs, wheel nuts, and LeanSteer frame.
Instead, when any other fastener is loose or removed, replace
the fastener with a new Segway-approved fastener. See
Appendix C, ”Fasteners” for more information.
• Do not attempt to repair any stripped or damaged screw hole.
Instead, replace the part. If replacement part is not available,
do not reassemble.
• Insert fasteners slowly and carefully. Do not cross-thread or
over-tighten fasteners. Tighten only to the prescribed torque.
• Failure to adhere to these warnings could lead to serious injury
or death or damage to property.
Unplug the
Segway PT.
Applies to Models
i2,x2,x2Turf
Qualifications
CustomerReplaceable
Customer Replaceable Kit
BatteryKit(20878‐00001)
(1)Li‐ionBattery
(4)Fasteners,M4x0.7x30
Required Tools
• Torquewrench,3mmdrive
• Hexwrench,3mm
To Next Page
Loading...
