Segway Personal Transporter i2 - 5. Fenders

Segway®PersonalTransporteri2,x2,x2TurfPartsReplacementGuide 5‐1
5. Fenders
Thischapterdescribestheremovalandinstallationprocedures
forthefenderofaGen2SegwayPT.Thefendersonthe
SegwayPTaredesignedtoprotecttheriderfromdebrisandto
safeguardtheriderwhileleaningintoturns.
TherearetwofendersperSegwayPT.
Themodeli2ha
sonetypeoffender;modelx2hasanother
typeoffender(whichattachestoafenderframe).
Thefollowingwa
rningsapplytotheinstructionsinthis
Section5regardingFenders:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow these instructions could
cause personal injury.
Read all
instructions.
Power off
the Segway PT.
Unplug the
Segway PT.
Finger or
hand hazard.
Applies to Models
i2,x2,x2Turf
Qualifications
CustomerReplaceable
Customer Replaceable Kits
i2Fender(20945‐00001)
(1)Fender
(4)Fasteners,11mm
x2Fender
(20961‐00001Left•20962‐00001Right)
(1)Fender
(4)Fasteners,18mm
x2FenderFrame
(20959‐00001Left•20960‐00001Right)
(1)Fenderframe
(4)Fasteners,18mm
(3)Fasteners,28mm
Required Tools
• Torquewrench,3/8”drive
• 3/8”hexsocketwrench,13mmdrive
• Hexbit,4mm
• T‐206‐lobebit
• 1/4”hexbitadapter