Segway Personal Transporter i2 - Fender Removal and Installation, i2

Segway®PersonalTransporteri2,x2,x2Turf PartsReplacementGuide 5‐3
Fender Removal and Installation, i2
To remove fender:
1. MakesureSegwayPTispoweredoffand
unplugged.
2. Re
movetire/wheelassembly(page4‐3).
3. Us
ingaT‐206‐lobe,remove(4)button‐head
fasteners.SeeFigure5‐1.
Figure5‐1:RemoveorInstallFender,i2
4. Liftfenderandremovefromgearbox.
To install fender:
1. MakesureSegwayPTispoweredoffand
unplugged.
2. Orientan
dplacefenderongearbox.UseT‐
206‐lobewrenchtodrive(4)button‐head
fasteners(20538‐00001)andtorqueto
1.5N‐m.SeeFigure5‐1.
3. Installtire/w
heelassembly(page4‐3).
4. Pe
rformpost‐servicetests(pageA‐2).
Fender
20945-00001
20538-00001