Segway Personal Transporter i2 - Wireless InfoKey Controller Removal and Installation

Segway®PersonalTransporteri2,x2,x2Turf PartsReplacementGuide 1‐7
Wireless InfoKey™ Controller Removal and Installation
To remove Wireless InfoKey controller:
1. PressreleasetabatbottomofInfoKey
Controllerdockadapter.See1inFigure1‐
10.
2. SlideWi
relessInfoKeyControlleroutof
WirelessInfoKeycontrollerdockadapter.
See2inFigure1‐10.
Figure1‐10:RemoveWirelessInfoKeyController
To install Wireless InfoKey controller:
1. MakesureInfoKeyControllerdockis
installed(page1‐8).
2. PlaceWi
relessInfoKeycontrollerontodock
adapterandslideintoplaceuntilreleasetab
(1inFigure1‐10)isengaged.
3. Pe
rformpost‐servicetests(pageA‐1).
InfoKey
21064
InfoKeyDock
20946-00001