3‐4 Segway®PersonalTransporteri2,x2,x2TurfPartsReplacement
6. Using3mmtorquewrench,installand
tightenremaining(2)outerfastenersto1.6
N‐m.
Do not use power tool. Do not cross-thread or
over-tighten fasteners. Tighten only to the
prescribed torque.
7. RepeatSteps3through5forotherbattery.
8. Pe
rformpost‐servicetests(pageA‐1).
Be sure to reinstall all four fasteners per battery.
Segway approved fasteners should be used. If a
fastener is missing, insert center fasteners first.
To Next Page
Loading...
