Shinko PCB1 - Page 137

- 137 -
Characters,
Factory Default
Setting Item, Setting Range Data
temp
1 ///0
PTN/STEP
indicator 10 lights.
Step 10 SV
Scaling low limit to Scaling high limit
time
1 00:00
PTN/STEP
indicator 10 lights.
Step 10 time
----
,
00:00 to 99.59 (Time unit follows the selection in [Step time
unit].)
If the key is pressed at 00:00, ---- will be indicated.
If ---- is set, Fixed value control will be performed using Step 10 SV.
_pid
1 ///1
PTN/STEP
indicator 10 lights.
Step 10 PID block number
1 to 10
rept
1 ///0
PTN/STEP
indicator turns off.
Number of repetitions
0 to 10000
chin
1 ----
PTN/STEP
indicator turns off.
Pattern link
---- Pattern link Disabled
chin Pattern link Enabled