Shinko PCB1 - Page 53

- 53 -
Characters,
Factory Default
Setting Item, Function, Setting Range
t3of
1 00:00
TS3 output OFF time
• Sets TS3 output OFF time.
• Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when /015 (Time signal output) is selected in [Event output EV3 allocation].
t3on
1 00:00
TS3 output ON time
• Sets TS3 output ON time.
• Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when/015 (Time signal output) is selected in [Event output EV3 allocation].
At this stage, settings for Event setting mode are complete.
Press the RST key. The unit reverts to RUN mode.