46 FLOWSIC100 Flare · Operating Instructions · 8013344/11L2/V 2-5/2018-10 · © SICK Engineering GmbH
Product Description
Subject to change without notice
III) FLSE100-EXS sender/receiver units certified according to ATEX and IECEx for use in
zone 1 and 2 and CSA approved Cl I Div1/Div2
Explosion protection: ATEX II 1/2 G Ex d [ia Ga] IIC T4 Ga/Gb,
CSA Cl I, Div1/Div2 groups BCD T4,
IECEx Ga/Gb Ex d[ia]IIC T4, optionally T6 with
reduced ambient temperature range (
→
pg. 210, § 6.1)
Applied standards: EN 60079-0, EN 60079-1,
EN 60079-11, EN 60079-26, respective IEC standards
C/UL standards
1 Non-retractable version
Permissible sample gas pressure/temperature range:
→
pg. 43, Fig. 11
Fig. 15 FLSE100-EXS sender/receiver units
1
Probe with 2-channel electronics (master)
3
Probe without electronics (slave)
Applied standards: EN 60079-0, EN 60079-11, EN 60079-26
1 Electronic unit in Exd housing
2 Connection Ex ia to slave probe
3 Connection Ex ia to master probe
Modules/parts not named:
→
pg. 31, Fig. 5
2
To Next Page
Loading...
