ONLINE HELP SOPAS Chapter 6
LECTOR®620
Service
8013778/Y269/2013-11-27 © SICK AG · Germany · All rights reserved · Subject to change without notice 163
6 Service
Operating data along with status and version information for diagnostic and analysis purpo-
ses can be retrieved from the Service folder.
6.1 Operating data
The data relating to the device, operation, and service and maintenance is combined on the
Operating data tab.
6.1.1 Device information
The identification data of the LECTOR
®
620 is indicated via the parameters of the Device in-
formation group.
This data is important for service work.
6.1.1.1 Manufacturer
The manufacturer of the LECTOR
®
620 is indicated in the Manufacturer display field.
6.1.1.2 Device type
The device type of the LECTOR
®
620 is indicated in the Device type display field.
6.1.1.3 Software version
The version of the installed firmware is indicated in the Software version display field.
6.1.1.4 Order number
The order number of the LECTOR
®
620 is indicated in the Order number display field.
6.1.1.5 Serial number
The serial number of the LECTOR
®
620 is indicated in the Serial number display field.
6.1.2 Operating data
Notes on how to operate the device are displayed under Operating data.
• P
OWER-ON COUNTER: Displays how many times the device has been switched on.
• O
PERATING HOURS: Displays the total number of device operating hours.
• P
OWER-ON TIME: Displays the current operating hours since the last switch-on.
6.1.3 Service information
Service and maintenance data is displayed in the Service information group. Maintenance
intervals can be entered.
• L
AST USER: User name of the last user to be logged in
• L
AST CONFIGURATION AT: Date and time of the last configuration saved in the device
• L
AST MAINTENANCE: Date on which maintenance was last completed
• N
EXT MAINTENANCE: Date on which maintenance should next be completed
To Next Page
Loading...
Need help?
General