SICK M4000 Advanced User Manual

Operating Instructions Chapter 14
M4000 Adv., Adv. A/P, Area
8010797/YT72/2016-02-19 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 137
Subject to change without notice
Ordering information
Description Part number
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-64#######
2033239
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-65#######
2033240
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-66#######
2033241
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-67#######
2033242
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-68#######
2033243
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-69#######
2033244
Additional front screen for M4000, including sliding nuts and fixing
screws, 2 pieces, suitable for:
M40#-70#######
2033245
 The additional front screens are bolted directly to the mounting groove on the M4000
using the sliding nuts and fixing screws.
 Each additional front screen fits both on the sender and on the receiver.
 An additional front screen reduces the scanning range of the system by 8%. If sender
and receiver each use an additional front screen, the scanning range will be reduced
by 16%.
Notes

SICK M4000 Advanced Specifications

General

Type	Multiple light beam safety device
Enclosure rating	IP65
Supply voltage	24 V DC
Safety integrity level	SIL3
Performance level	PL e
Protection Rating	IP65
Operating Voltage	24 V DC
Number of beams	2 to 4 beams
Resolution	70 mm
Ambient operating temperature	-25 °C ... +55 °C
Angular Resolution	Not applicable
Operating Temperature	-25 °C ... +55 °C