SICK Master Data Analyzer User Manual

8 MAINTENANCE AND REPAIRS
8020065-ZSP4/2017-08-10|SICK
OPERATING INSTRUCTIONS | Master Data Analyzer
Subject to change without notice
100
8.1.3 Cleaning the display
To guarantee a long service life and full functionality, all greasy fingerprints and smear
marks should be cleaned from the touch screen.
1. The Master Data Analyzer should be switched off before any cleaning is commenced.
If the display is on whilst cleaning, this may unintentionally trigger functions and
malfunctions.
2. Carefully wipe the areas that require cleaning with a clean, dry microfiber cloth. Use
small circular movements when doing so.
Fig. 50: Cleaning – Touchscreen display
Use the SICK lens cloth (part no. 4003353).
CAUTION
Damage caused by incorrect cleaning
The touchscreen is made of plastic. Scratches and streaks on the screen will impair the
device’s functionality.
Measures
▸
Only use a soft, dry, lint-free cloth to clean the screen.
▸
Do not use any solvents during cleaning. These may damage the touchscreen.
▸
Do not exert too much pressure on the screen when cleaning.
Note
Recommendation

SICK Master Data Analyzer Specifications

General

Brand	SICK
Model	Master Data Analyzer
Category	Measuring Instruments
Language	English