8 MAINTENANCE AND REPAIRS
8020065-ZSP4/2017-08-10|SICK
OPERATING INSTRUCTIONS | Master Data Analyzer
Subject to change without notice
8.2.4 Replacing the IP camera
The IP camera is available under part number 6055384.
Removing the camera
1. Unscrew the screws from the dust shield housing.
Fig. 58: Replacing components: IP camera – Removing the dust shield housing
2. Detach the dust shield housing from the camera. The Ethernet connection cable is now
accessible.
Fig. 59: Replacing components: IP camera –Unplugging the Ethernet cable from the IP camera
3. Detach the Ethernet cable from the camera.
4. Unscrew the camera’s fixing screws.
Fig. 60: Replacing components: IP camera – Removing the IP camera from the mounting bracket
5. Remove the camera from the mounting bracket.
To Next Page
Loading...
