SICK Master Data Analyzer User Manual

7 OPERATION
8020065-ZSP4/2017-08-10|SICK
OPERATING INSTRUCTIONS | Master Data Analyzer
Subject to change without notice
70
7.2 Steps for preparing for your first measurement
7.2.1 Adjusting the display and operating position
Before you begin working with the Master Data Analyzer, it is recommend that the display
is positioned in an optimum display and operating position.
Getting started
The display is mounted to a pole. The pole is fixed to the controller housing with two
brackets.
▸
Unscrew the fixing screws for the brackets.
Fig. 42: Adjusting the display and operating position of the monitor
Changing the position
1. Turn the display to the required position.
2. Move the pole up or down.
Securing the display
▸
Tighten the fixing screws for the brackets.
NOTE
The display can tilt if the screws on the upper bracket are unscrewed.
▸
Do not unscrew the fixing screws on the upper bracket!
▸
The display and operating position should only be altered by following the instructions
for the lower brackets.

SICK Master Data Analyzer Specifications

General

Brand	SICK
Model	Master Data Analyzer
Category	Measuring Instruments
Language	English