COMMISSIONING 6
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | Master Data Analyzer
6.3 Adding the MDA to the SOPAS project
6.3.1 Starting the device search
Use the device search to add the MDA controller to the project.
Configuring the device search
1. Click the Search settings button. The Connection Wizard starts. This helps you to
establish a link with a connected device.
2. Select the Device family oriented search (recommended) option and click Next to
confirm.
3. Select the device family from the list. This restricts the search for connected devices to
devices from that family. Press Next to confirm.
To Next Page
Loading...
