SAFETY 2
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | Master Data Analyzer
Risk of crushing when settings down the MDA
The adjustable feet are designed so that the safety distance between the bottom of the
device and the tabletop can be observed.
There is a risk of crushing when installing the MDA on the tabletop.
Measures
▸
Do not put your hands under the base of the housing when installing the MDA.
Risk of crushing due to the device tipping over
There is a risk of the MDA tipping over during installation. An unsuitable surface may also
lead to the device tipping over.
The device tipping over can lead to the severe crushing or even loss of limbs.
There is also the risk of inflicting damage to the device.
Measures
▸
Place the MDA on a sufficiently stable and steady table.
▸
Secure the table against rolling away.
▸
Make sure that all four adjustable feet are completely on the tabletop.
2.4.4.3 Risks during operation
Risk of injury and/or damage caused by faulty operation.
Risk of injury and/or property damage from absence of qualification and/or incorrect and
non-intended use.
Measures
▸
Follow the instructions on proper operation.
▸
Only use the device in perfect working order and for its intended purpose, keeping
safety and potential dangers in mind, and in compliance with the operating
instructions.
▸
Never exceed the permitted technical limit values.
▸
Do not do work on the device
• If you do not have the required qualification
• If you have not received full instructions from the operating entity
• If you have not completely read or understood these operating instructions.
Risk of injury when lifting heavy objects.
There is a risk of injury when placing down and removing the objects to be measured.
Objects weighing up to 30 kg can be measured.
Measures
▸
Consider ergonomic aspects when placing down and removing the objects.
To Next Page
Loading...
Need help?
General
