MAINTENANCE AND REPAIRS 8
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | Master Data Analyzer
Cleaning the internal area
▸
Only use a soft, dry, lint-free cloth to clean the internal housing area.
▸
Carefully vacuum the internal housing area if required.
Mounting the glass panel
1. Carefully place the glass panel back on the four connecting bolts.
2. Re-tighten the four knurled screws.
3. Release the measurement gantry from its fixing.
Performing teach-in
It is recommended that the teach-in is performed once the internal housing area is
opened. Refer to chapter 7.9.2.3 Performing teach-in.
8.1.6 Cleaning the IP camera’s dust shield housing
Regularly clean the IP camera’s dust shield housing.
Please observe the cleaning instructions supplied by the camera manufacturer.
To Next Page
Loading...
Need help?
General
