2 SAFETY
8020065-ZSP4/2017-08-10|SICK
OPERATING INSTRUCTIONS | Master Data Analyzer
Subject to change without notice
2.4.6 Work station
The work station for measuring objects is located on the side of the display and the hand-
held scanner. The handles for moving the measurement gantry are also located on this
side.
Fig. 2: Work station
We recommend placing the Master Data Analyzer on a sufficiently stable and steady table
so that the measuring objects can be loaded and unloaded in line with ergonomic
principles. The table must be secured against rolling away.
A sliding table is available as an accessory.
2.4.7 Protective equipment
The operating entity must wear personal protective equipment (PPE) in accordance with
the locally applicable safety regulations.
Personal protective equipment for transport and installation
▸
Wear safety shoes in addition to your basic safety equipment during transport and
installation.
2.4.8 The operating entity’s responsibilities
The operating entity must execute the electrical installation in compliance with the
respective provisions of the local electricity supply company as well as applicable
standards.
The following directive applies to the Master Data Analyzer:
• EMC Directive: 2014/30/EU
To Next Page
Loading...
Need help?
General
