4 TRANSPORT, ASSEMBLY, AND MOUNTING
8020065-ZSP4/2017-08-10|SICK
OPERATING INSTRUCTIONS | Master Data Analyzer
Subject to change without notice
Placing the MDA on a table
1. Put the MDA with the four adjustable feet on a table. The table must be stable, of a
sufficient size and secured against rolling away.
A non-slip base is recommended.
Make sure that all four adjustable feet are completely on the tabletop.
2. Align the Master Data Analyzer. You can use a spirit level or the spirit level visible on
the interior housing to do this.
A sliding table is available as an accessory with or without a rechargeable battery (see
also chapter 3.1 Scope of delivery).
The sliding table is equipped with an anti-slip surface as standard.
Note
Note
To Next Page
Loading...
Need help?
General
