EasyManua.ls Logo

Siemens Brodersen MC55 AT - Page 113

Siemens Brodersen MC55 AT
475 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC55_ATC_V04.00 Page 113 of 475 3/17/06
Confidential / Released
EXAMPLE 2
Phone lock (<facility>="PS")
To lock the ME to the currently inserted SIM card, first specify a password for <facility> "PS":
Optionally, if "PS" password was defined before, change existing password:
Then, activate the Phone Lock:
To operate the mobile with the SIM card for which "PS" lock was activated:
To operate the mobile with other SIM card than the one used for the "PS" lock:
Enter SIM PIN of present card, followed by "PS" lock password.
To deactivate the Phone Lock:
AT+CPIN?
Make sure that PIN1 authentication is valid.
OK
AT+CPWD="PS",,"1234"
If "PS" lock has not been set before: enter new password.
OK
AT+CPWD="PS","1234","3333"
To replace existing "PS" password: Enter old and new password.
OK
AT+CLCK="PS",1,"3333"
Locks the mobile to the current SIM card.
OK
AT+CPIN?
+CPIN: SIM PIN
OK
AT+CPIN="9999"
OK
No additional password is required for operation (SIM recognized by
mobile).
AT+CPIN?
+CPIN: SIM PIN
OK
AT+CPIN="1111"
OK
PIN authentication accepted.
AT+CPIN?
+CPIN: PH-SIM PIN
"PS" lock password is required.
OK
AT+CPIN="3333"
OK
"PS" Lock password has been accepted. ME is fully operational now.
AT+CLCK="PS",0,"3333"
Phone Lock password has to be provided again.
OK
Now the mobile can be used with any SIM card, without the need of the
phone lock password.

Table of Contents

Related product manuals