MC55_ATC_V04.00 Page 445 of 475 3/17/06
Confidential / Released
*) Notes on ^SCCFC, +CCWA, ^SCLCK: The output depends on the affected basic service of the Star-Hash code. One line
will be output for every tele- or bearer service coded in basic service code BS.
^SCCFC and ^SCLCK are modified by giving an additional <reason> or <fac> in front of the regular output string gener-
ated by the standard commands +CCFC and +CLCK.
Table 20.2: Abbreviations of Codes and Parameters used in Table 20.1
Call barring
(choice of *,#,*#)33*Pw*BS# Act/deact/int BAOC ^SCLCK : <fac>, <status>, <class>
[, ...] like +CLCK
*)
(Refer to
AT+CLCK)
(choice of *,#,*#)331*Pw*BS# Act/deact/int BAOIC see above
(choice of *,#,*#)332*Pw*BS# Act/deact/int BAOIC exc.home see above
(choice of *,#,*#)35*Pw*BS# Act/deact/int. BAIC see above
(choice of *,#,*#)351*Pw*BS# Act/deact/int BAIC roaming see above
#330*Pw*BS# Deact. All Barring Services see above
#333*Pw*BS# Deact. All Outg.Barring Services see above
#353*Pw*BS# Deact. All Inc.Barring Services see above
Call Hold / Multiparty
C[C] in call Call hold and multiparty +CME ERROR: <err> / OK
USSD messages
[C]...[C]# Send USSD message +CME ERROR: <err> / OK
C[C] (excluded 1[C]) Send USSD message +CME ERROR: <err> / OK
Abbreviation Meaning Value
ZZ Type of supplementary services:
Barring services
All services
330
Not specified
DN Dialing number String of digits 0-9
BS Basic service equivalent to parameter class:
Voice
FAX
SMS
SMS+FAX
Data circuit asynchron
Data circuit synchron
dedicated PAD access
dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+Packet+PAD
All Services
11
13
16
12
25
24
27
26
21
22
20
--
T Time in seconds In contrast to AT+CCFC, parameter
T has no default value. If T is not
specified, an operator defined
default or the last known value may
be used, depending on the network
operator.
Star-Hash Code Functionality Response, also refer to Table 20.3
To Next Page
Loading...
