Siemens Brodersen MC55 AT - AT^SMGO Set or Query SMS Overflow Presentation Mode or Query SMS Overflow

MC55_ATC_V04.00 Page 362 of 475 3/17/06
Confidential / Released
13.20 AT^SMGO Set or query SMS overflow presentation mode or
query SMS overflow
The write command sets the overflow presentation mode.
The read command returns the overflow presentation mode and the SMS overflow status.
Syntax
Unsolicited Result Code
SMS buffer change:
^SMGO: <mode>
Status of SMS buffer has changed.
Parameter Description
SMS overflow presentation mode
[0]
(&F)
Disable
1 Enable
SMS overflow status
0 Space available
1 SMS buffer full (The buffer for received short messages is <mem3>. See
AT+CPMS.)
2 Buffer full and new message waiting in SC for delivery to phone
Test Command
AT^SMGO=?
Response(s)
^SMGO: (list of supported<n>s)
OK
Read Command
AT^SMGO?
Response(s)
^SMGO: <n>, <mode>
OK
ERROR
+CMS ERROR
Write Command
AT^SMGO=<n>
Response(s)
OK
ERROR
CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
SIEMENS % % % % % % ! ! !
<n>
(num)(&W)(&V)
<mode>
(num)(&V)