Siemens Brodersen MC55 AT - AT+CGPADDR Show PDP Address

MC55_ATC_V04.00 Page 279 of 475 3/17/06
Confidential / Released
11.8 AT+CGPADDR Show PDP address
Syntax
Command Description
The test command returns a list of defined <cid>s.
The write command returns a list of PDP addresses for the specified context identifiers. If no <cid> is specified,
the addresses for all defined contexts are returned.
Parameter Description
A numeric parameter which specifies a particular PDP context definition (see AT+CGDCONT command).
A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no <cid> is specified, the write command will return a list of all defined contexts.
Test Command
AT+CGPADDR=?
Response(s)
[+CGPADDR: (list of defined <cid>s)]
OK
Write Command
AT+CGPADDR=[<cid>[,<cid>]]
Response(s)
[+CGPADDR: <cid>, <PDP_address>]
[+CGPADDR: <cid>, <PDP_address>]
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM 07.07 % % % % % % ! ! !
<cid>
(num)
<PDP_address>
(str)